Gate motor repairs are often simpler than they look. Many gates that stop working have a tired battery, a board damaged by lightning, or a gate that has become too heavy for the motor because a wheel or track has worn. A good repairer finds the actual fault before fitting parts, rather than swapping things until the gate moves. This page covers the faults that come up most, what they usually point to, and when a repair stops making sense.
The battery
The battery is the first suspect. A gate that only works with mains power on, slows down, or stops halfway during load shedding usually needs a new battery. Batteries often last about two to three years, less with heavy use, heat and long power cuts. The repairer tests it under load and fits one matched to the motor's voltage and size.
Board, gears and rack
- Control board: Highveld storms and surges when power returns after load shedding are a common cause of a dead board. A board can sometimes be repaired; often it is replaced, and surge protection is worth adding.
- Gearbox and pinion: a motor that runs but doesn't move the gate, or grinds, may have stripped gears or a worn pinion.
- Rack: worn or broken teeth, a loose section or the wrong gap make the gate jump or stall at the same spot.
See spares for the parts involved.
Gate, beams, remotes and limits
A gate that has come off its track, has worn wheels or a broken guide roller makes the motor work too hard and can trip its obstruction sensing, so it stops and reverses. Misaligned or dirty safety beams stop a gate closing. A gate that stops short or runs into the end stop may need its travel limits set again. If one remote works and another doesn't, the problem is the remote or its coding, covered under remote programming. Motors forced open by thieves often need a new cover, lock or board.
Repair or replace
A repair usually makes sense when the motor is reasonably new and the part is available. When an old motor needs a board and a gearbox, or parts for it are no longer made, ask for a price on a new motor as well. A replacement can often reuse the existing plinth, rack and beams, which keeps the cost down. If the motor has been struggling for years, ask whether it was undersized for the gate in the first place: a heavier-duty motor rated for the gate's mass may last far longer. Whatever you decide, have the gate itself sorted out, because a worn track will wear out a new motor just as fast.
What to put in your request
- What the gate does, or doesn't do
- Sliding or swing, and roughly how old the motor is
- Whether it fails only during power cuts
- Whether there was a storm or a break-in
- Whether the gate is stuck open or closed
Gate Motor Repairs for homes, complexes, estates, shops, warehouses, farms and more
- Houses: a sliding gate that stops halfway or only works with the power on
- Townhouse complexes and body corporates: a shared gate repaired quickly so residents can get in and out
- Security estates: entrance and home gates kept working under the estate's rules
- Offices and business parks: a parking gate that stalls or won't close at a business park
- Shops, restaurants and filling stations: a delivery yard gate that won't open behind a shop
- Factories, warehouses and workshops: heavy steel yard gates with worn racks, gears or wheels
- Farms, smallholdings and lodges: a solar gate motor far from the house with a tired battery or panel
- Schools, clinics and public buildings: gates at schools, clinics and municipal yards made secure again
- Builders and developers: gate motor faults fixed on new homes before handover
