A sectional garage door is made of horizontal panels that roll up curved tracks and lie flat under the ceiling, which makes it the most common door on newer South African homes. Its opener is a motor head on the ceiling that pulls a trolley along a rail, and the trolley pulls the door by a short arm. The choices that matter are the drive (chain, belt or screw), the rail length, the headroom above the door and the pull force for a single or double door. Here is how they fit together.
Chain, belt or screw drive
- Chain drive: strong and common, a little noisier, a good choice for a garage away from the bedrooms.
- Belt drive: usually quieter, which matters when there is a bedroom or study above or beside the garage.
- Screw drive: a threaded rod turns the trolley along; fewer parts but it likes regular lubrication.
All three need the chain, belt or screw tensioned and checked on each service.
Rail, trolley and the manual release
The rail is fixed to a bracket on the header, the wall above the door, and hangs from the ceiling at the motor end. The trolley runs along it and links to the door's top panel with a door arm. Pull the release cord and the trolley lets go so the door can be opened by hand in a power failure that outlasts the battery. Make sure everyone in the house knows where the cord is. On homes where theft is a worry, ask how the release can be secured; see garage door locks.
Headroom and double doors
The rail and trolley need space between the top of the opening and the ceiling, often about 50 mm or more depending on the motor and the track. The installer measures the headroom before quoting, and low ceilings may need a different track or a low-headroom kit. A double door, around 4.8 to 5 m wide, is heavier than a single one, around 2.4 to 2.5 m, so it calls for a motor nearer the top of the usual home range of roughly 600 to 1,200 N. Check the maker's rating.
Wall button, light and access
Most kits include a wall button inside the garage and a courtesy light that stays on for a short while after the door moves. Many add extra remotes, a keypad or a smart opener. Infrared safety beams across the opening are worth asking for if children or pets use the garage. The motor's own obstruction sensing should stop and reverse the door if it meets something; the installer sets the force so it does, and it should be tested on every service. Ask for the motor to be fitted near a plug point on the ceiling, or for an electrician to add one.
What to put in your request
- Single or double door, with the opening size
- Headroom from the top of the opening to ceiling
- Chain, belt or screw drive, or ask for options
- Whether there is a plug point on the ceiling
- Extras: beams, keypad, extra remotes
Sectional Garage Door Motors for homes, complexes, estates, shops, warehouses, farms and more
- Houses: a chain or belt drive motor on a single or double sectional door
- Townhouse complexes and body corporates: identical motors on each unit's sectional door, remotes coded per unit
- Security estates: quiet belt drives on double doors under bedrooms and studies
- Offices and business parks: rail motors on sectional doors to staff parking and storerooms
- Shops, restaurants and filling stations: sectional door motors on delivery bays behind shops and restaurants
- Factories, warehouses and workshops: heavier rail motors on smaller workshop sectional doors
- Farms, smallholdings and lodges: rail motors on sectional doors to vehicle sheds and stores
- Schools, clinics and public buildings: motors on sectional doors at fire stations, depots and school garages
- Builders and developers: motors fitted to new sectional doors as each unit is finished
Frequently asked questions
Do you fit sectional door motors yourselves?
No. We send your request to independent installers and door companies near you, and they quote you directly. We do not sell or fit motors. Send the door size, the headroom if you can measure it, and whether you would prefer a chain or belt drive.
Is a belt drive worth it?
If the garage sits under or beside a bedroom, many people find the quieter running worth it. In a detached garage a chain drive does the same job. Ask installers to quote both so you can compare. A well balanced door with lubricated rollers and hinges also runs more quietly, whatever the drive.
My sectional door is heavy to lift by hand. Can a motor fix that?
Can I keep my old rail when I change the motor?
Sometimes, if the new motor is made for that rail, but most motors come with their own. Our page on motor replacement covers when a straight swap works.
