Get a quote

Motors & openers

Match the motor to the gate's mass, not the gate's looks

Free quotes from gate motor installers and suppliers across South Africa. One request, no obligation.

Rack and pinion drive
A black steel sliding gate with a grey motor box on a concrete plinth and a toothed rack along its bottom rail
READYRackA toothed rack on the gate

Door card: Sliding Gate Motors

BAY 14, 2.5 x 2.15 m
01Suits
Sliding gates on homes, complexes and farms
02How it is done
Rack and pinion, motor on a concrete plinth
03Scope
Home gates up to about 500 kg, heavier duty
04Check first
Gate slides freely by hand before fitting
05Lead time
Kits often in stock; fitted in about a day

Most South African homes with a driveway have a sliding gate, and most of those gates run on a gate motor on a concrete plinth beside the opening. The motor turns a small pinion that meshes with a toothed rack bolted along the gate, pushing it open and pulling it closed. Choosing one comes down to the gate's mass, how many times a day it opens, how you will keep it running through load shedding and how you will stop it being stolen. Here is what to look at before you ask for prices.

Rated gate mass

Sliding gate motors are rated by the mass of gate they can move. Home motors are often rated for gates up to about 500 kg; heavier-duty ones go up to about 1,000 kg and more. Check the rating against your gate: a solid steel or wooden infill gate is far heavier than an open palisade one of the same size. Leave headroom on the rating if the gate is long, solid and catches wind. A townhouse complex gate that opens hundreds of times a day needs a motor made for that duty, not a home motor working flat out.

The gate comes first

A motor only moves a gate that runs freely. Before it goes on, the gate should slide easily by hand, with sound wheels, a straight, clean track, guide rollers at the top and end stops so it can't run off the rail. The rack, steel or nylon, is fixed along the gate so it meshes evenly with the pinion along the full travel. The plinth is cast level at the right height. Power reaches the motor through a cable in conduit, sometimes in a trench from the house. Fitting a motor with a new plinth and rack often takes most of a day. All of this is covered under gate motor installation.

Battery, solar and load shedding

Most sliding gate motors run on 12 V or 24 V DC from a battery that mains power keeps charged, so the gate works through load shedding. A 12 V 7 Ah sealed lead-acid battery is very common; heavy use or long outages call for a bigger one. Gates far from a power point can run on a solar panel and a larger battery. When a gate slows down, stops halfway or only works with mains on, the battery is usually done.

Theft, beams and lightning

  • Anti-theft bracket: a lockable steel cage over the motor; gate motors and batteries are stolen often. See locks and brackets.
  • Safety beams: infrared beams stop the gate closing on a car, child or pet.
  • Surge protection: storms and power surges blow control boards; an electrician fits a surge arrestor and checks the earthing.

What to put in your request

  • Gate length, height and material
  • Open palisade or solid infill
  • How many times a day it opens
  • Whether there is power at the gate, or solar
  • Extras: bracket, beams, keypad, extra remotes

Sliding Gate Motors for homes, complexes, estates, shops, warehouses, farms and more

  • Houses: a motor on a plinth driving a palisade or solid sliding gate on the street
  • Townhouse complexes and body corporates: a heavy duty motor on the shared entrance gate with many cycles a day
  • Security estates: motors on entrance and service gates with access control and beams
  • Offices and business parks: motors on parking and delivery gates at business parks
  • Shops, restaurants and filling stations: motors on yard and delivery gates behind shops and filling stations
  • Factories, warehouses and workshops: heavy duty motors on long steel gates at factories and warehouses
  • Farms, smallholdings and lodges: solar powered motors on long gates far from the farmhouse
  • Schools, clinics and public buildings: motors on gates at schools, clinics and municipal yards
  • Builders and developers: gate motors on new complex entrances and each new home's gate

Frequently asked questions

Do you sell gate motors yourselves?

No. We are a free quote request service. Independent gate motor installers and suppliers in your area receive your request and quote you directly, for the motor kit, fitting and any extras.

How do I know how heavy my gate is?

Give installers the length, height and material and say whether it is open palisade or solid infill. They can estimate the mass and pick a motor with a suitable rating. Our planner gives a rough figure as a guide, not a design.

What makes up the price of a gate motor?

Installers quote a motor kit (motor, rack, remotes and battery) plus installation. A new plinth, extra rack, an anti-theft bracket, beams, a keypad, a solar kit, a cable run from the house and surge protection are extras.

My gate motor stopped after a storm. Does it need replacing?

Often not. A blown control board is a common repair after lightning, and a technician can test the board, the battery and the power supply before anything is replaced. See gate motor repairs. Ask about surge protection while they are there.

More garage door and gate motor supplies and services

Free quote request, no obligation

Request quotes for sliding gate motors

Fill it in the way a fitter would size up the job: the door or gate, its size and what it is made of, how often it is used, or simply how many. The planner works out a rough weight and the motor to ask for, and draws it as you type. Installers and suppliers in your area quote you directly.

Job cardSliding Gate Motors
Job
49648
Date
2026-11-20
Cost to you
Free

01The job

02The gate (optional, it helps the quote)

Your gate, front viewA guide

-
-
-
-
-
-
Estimate
-

A guide from your figures, not a quote.

03On site now

04Your list (optional)

  1. 01
  2. 02
Up to 12 lines: motors, remotes, batteries, springs, parts or work.
Needs and options

05Your details

Free and no obligation. By sending you agree that we may share your request with suitable garage door and gate motor installers and suppliers. See our privacy policy.

Get a free quote