Sliding gate motors are sold by the mass of gate they can move, commonly 250, 500, 1,000 and 2,000 kg, and swing gate motors by the length and weight of a leaf. Few people know what their gate weighs, so this calculator estimates it from the size and the material, then gives the rating to ask for with a margin, the rack in 1 m lengths and the battery to expect.
How the weight is worked out
A sliding gate leaf is usually about 0.5 m longer than the opening so it overlaps the pillar when closed, so the calculator uses the opening plus 0.5 m times the height. It then multiplies by a rough weight per square metre: about 12 kg for aluminium, 16 kg for steel mesh or bars, 22 kg for steel palisade, 28 kg for wood and 34 kg for solid steel sheet. A swing gate uses the opening, split over one or two leaves.
The motor rating is the next class above that weight. A gate of 420 kg gets a 500 kg motor, not one that just copes. A gate that runs stiffly, on a slope or on worn wheels needs fixing first, because a motor rating assumes a gate that a person can push open with one hand.
Rack, plinth and battery
- Rack: it runs the length of the leaf, so the calculator counts the opening plus 0.5 m and rounds up to whole 1 m lengths. Steel rack suits heavy gates; nylon rack is quieter on light ones.
- Plinth: the motor sits on a concrete plinth or a base plate set at the right height for the rack.
- Battery: most domestic motors run on a 12 V battery, often 7 Ah, charged from the mains. Busy gates, or gates far from power, need a bigger battery or a solar panel sized for the use. See the battery backup calculator.
What the price guide covers
The motor range is a supply price for a sliding gate motor or kit of up to about 1,000 kg, or a swing operator from a single leaf to a double leaf kit. Fitting is labour only: about R1,500 to R3,000 for a sliding gate and R2,500 to R4,500 for a swing gate. Both come from South African retailer listings and cost guides checked in November 2026. Heavier gates are quoted per job, and extras such as safety beams, an anti-theft bracket and more remotes add to it.
Frequently asked questions
My gate is about 400 kg. Is a 500 kg motor enough?
Do swing gates need one motor or two?
Why does the calculator add 0.5 m to a sliding gate?
Can a gate motor run on solar?
More garage door and gate tools
- Garage door motor size calculatorDoor size and material in, rough weight, motor class, rail and cost out
- Gate motor battery backup calculatorHow many openings a battery gives you during load shedding or an outage
- Garage door spring life calculatorHow many years your torsion springs should last at your daily use
- Garage door and gate motor cost calculatorAdd a motor, fitting, remotes, batteries, beams and repairs for a total range
- Gate and garage door motor troubleshooterAnswer a few questions to find the likely fault and what to check first