Get a quote

Fault finder

Gate and garage door motor troubleshooter

Gate or garage door not working? Answer a few questions to find the likely cause, the checks that are safe to do yourself, and when it is time to call a technician.

Gate and garage door motor troubleshooterA guide, not a design or a quote. Nothing you type here is sent anywhere.

    Most gate and garage door motor faults come down to a handful of causes: no power or a tired battery, a remote that has lost its code or its battery, safety beams that are blocked or out of line, a gate or door that drags, or a broken spring. The troubleshooter walks you through the likely ones in order, starting with the checks anyone can do safely.

    Safety first

    • Switch off the mains at the motor's isolator and disconnect the battery before you open a motor's cover.
    • Never pull the manual release on an open garage door that may have a broken spring: it can drop.
    • Keep children and pets clear of moving gates and doors while you test.
    • Leave springs, cables and control board work to a trained technician.

    What to tell the technician

    Say whether it is a gate or a garage door, the type of motor if you know it, what it does (nothing, hums, starts and stops, reverses), whether it works on mains, on battery or neither, any beeps or flashing lights, and what changed recently: a storm, load shedding, a new remote or a knock from a car. That helps them bring the right parts the first time. See garage door repairs and gate motor repairs.

    Frequently asked questions

    Why does my gate open but not close?
    Most often the safety beams are blocked, dirty or out of line, so the motor will not close for safety. Clear and clean the beams and check their lights. If that does not help, the beams or the control board may need a technician.
    My garage door goes down and then back up. Why?
    The motor senses an obstacle. Check for something in the beam path, then for a door that sticks on the way down. If it still reverses, the force setting or the door's balance needs attention.
    The motor hums but the gate does not move. What is wrong?
    Check the gate is not left in manual release. If it is engaged, the battery may be too weak, the gate may be stuck, or a gear or the rack may be worn. Switch off and call a technician if the gate is free and the battery is good.
    After a storm my gate motor stopped. Is it the board?
    It may be. Lightning and power surges often damage the control board or the charger. Check the fuse and the battery first, then ask a technician to test the board. Surge protection helps prevent it happening again.

    More garage door and gate tools

    Free quote request, no obligation

    Get quotes for the job

    Fill it in the way a fitter would size up the job: the door or gate, its size and what it is made of, how often it is used, or simply how many. The planner works out a rough weight and the motor to ask for, and draws it as you type. Installers and suppliers in your area quote you directly.

    Job cardGarage Door Repairs
    Job
    92906
    Date
    2026-11-20
    Cost to you
    Free

    01The job

    02How many (optional, it helps the quote)

    Your requestA guide

    -
    -
    -
    -
    -
    -
    Estimate
    -

    A guide from your figures, not a quote.

    03On site now

    04Your list (optional)

    1. 01
    2. 02
    Up to 12 lines: motors, remotes, batteries, springs, parts or work.
    Needs and options

    05Your details

    Free and no obligation. By sending you agree that we may share your request with suitable garage door and gate motor installers and suppliers. See our privacy policy.

    Get a free quote